Difference between revisions of "Oddities"

From PrattWiki
Jump to navigation Jump to search
Line 1: Line 1:
 
This page is for posting "strange" things that happen, particularly with the Teer machines.  If we can get them explained and solved - great!  If not - at least you will know you were not alone!  The machines to avoid are given below.
 
This page is for posting "strange" things that happen, particularly with the Teer machines.  If we can get them explained and solved - great!  If not - at least you will know you were not alone!  The machines to avoid are given below.
== Machines to Avoid as of 23:29, 28 September 2014 (EDT) ==
+
== Machines to Avoid as of 12:08, 26 October 2014 (EDT) ==
'''Teer 04, 11, 12, 13, 18, 25, 26, 38, 39, 41'''
+
'''Teer 16, 23'''
  
 
=== Not Responding ===
 
=== Not Responding ===
Check [http://classes.pratt.duke.edu/UTILS/sites.html Ping Results] to see which machines are not responding to hails.  As of 23:29, 28 September 2014 (EDT) it's  11, 14, 18, 26, 38, and 39.
+
Check [http://classes.pratt.duke.edu/UTILS/sites.html Ping Results] to see which machines are not responding to hails.  As of 12:08, 26 October 2014 (EDT) it's  16 and 23.
 
 
=== MATLAB LAPACK Issue ===
 
Some people reported an error with LAPACK when using polyval on MATLAB. OIT confirmed this is a known bug with MathWorks [http://www.mathworks.com/support/bugreports/961964 Bug Report] and they are working on getting the fix installed.
 
* Date(s): 9/2-present/2014
 
* Resolved: 9/5/2014 - patch pushed out to Teer machines by OIT
 
** '''Unresolved''' by observation on 9/8/2014...
 
* Machines: Teer 04, 12, 13, 25, 26 - but only some people, not all
 
* Solution: Log in to a different machine...
 
  
  
Line 33: Line 25:
  
 
== Resolved ==
 
== Resolved ==
 +
 +
=== MATLAB LAPACK Issue ===
 +
Some people reported an error with LAPACK when using polyval on MATLAB. OIT confirmed this is a known bug with MathWorks [http://www.mathworks.com/support/bugreports/961964 Bug Report] and they are working on getting the fix installed.
 +
* Date(s): 9/2-mid-October
 +
* Resolved: 9/5/2014 - patch pushed out to Teer machines by OIT
 +
** '''Unresolved''' by observation on 9/8/2014...
 +
** Re-resolved mid-October
 +
* Machines: Teer 04, 12, 13, 25, 26 - but only some people, not all
 +
* Solution: Log in to a different machine...
  
 
=== Prompt doesn't appear ===
 
=== Prompt doesn't appear ===

Revision as of 16:08, 26 October 2014

This page is for posting "strange" things that happen, particularly with the Teer machines. If we can get them explained and solved - great! If not - at least you will know you were not alone! The machines to avoid are given below.

Machines to Avoid as of 12:08, 26 October 2014 (EDT)

Teer 16, 23

Not Responding

Check Ping Results to see which machines are not responding to hails. As of 12:08, 26 October 2014 (EDT) it's 16 and 23.


Other

Warnings / Other Things That Aren't Actually Problems

evince SettingsDaemon

When starting emacs, a strange error (or hundreds of them show up) saying:

** (evince:####): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
  • Date(s): Starting two years ago, continuing on
  • Machines: All Teer
  • Solution: It still works...hit enter to get to a new command prompt but evince should be working

Xlib: extension missing

Occasionally, the error message comes up with graphical programs saying:

Xlib:  extension "RANDR" missing on display "localhost:10.0".
  • Date(s): Starting two years ago, continuing on
  • Machines: All Teer
  • Solution: The graphical programs still work...hit enter to get to a new command prompt but the graphical program should be working

Resolved

MATLAB LAPACK Issue

Some people reported an error with LAPACK when using polyval on MATLAB. OIT confirmed this is a known bug with MathWorks Bug Report and they are working on getting the fix installed.

  • Date(s): 9/2-mid-October
  • Resolved: 9/5/2014 - patch pushed out to Teer machines by OIT
    • Unresolved by observation on 9/8/2014...
    • Re-resolved mid-October
  • Machines: Teer 04, 12, 13, 25, 26 - but only some people, not all
  • Solution: Log in to a different machine...

Prompt doesn't appear

Despite allowing you to log in, the computer hangs after the introduction and never gets to a command prompt.

  • Date(s): 9/5/2014
  • Resolved: 9/28/2014
  • Machines: Teer 05
  • Solution: Log in to a different machine...

AFS Drive not connected (EGR103 does not exist)

When you try to cd to an AFS folder, it doesn't exist.

  • Date(s): 9/4-??/2014
  • Resolved: 9/28/2014
  • Machines: Teer 07, 41 (03 connects now)
  • Solution: Log in to a different machine...

matlab command not found

On teer37, the matlab command is missing.

  • Date(s): 9/2-4/2014
  • Resolved: 9/2/2014
  • Machines: Teer 37
  • Solution: Log in to a different machine...

Password not accepted

Currently, teer03 is not accepting passwords correctly.

  • Date(s): 9/2/2014
  • Resolved: 9/4/2014
  • Machines: Teer 03
  • Solution: Log in to a different machine...

MATLAB R2013a vs. R2014a

Some people type matlab & and an older version of MATLAB comes up.

  • Date(s): 9/2/2014
  • Resolved: 9/4/2014
  • Machines: Teer 15, 27, 34
  • Solution: Log in to a different machine...