ECE 280/Spring 2010/Test 2

From PrattWiki
Revision as of 00:43, 8 April 2010 by DukeEgr93 (talk | contribs)
Jump to navigation Jump to search

This page lists the topics covered on the second test for ECE 54 Spring 2010. Post any questions about the test coverage to the discussion page.

Test II Spring 2010 Coverage

Draft 1: 4/7/2010

  1. Everything on Test 1
  2. Fourier Series
    • Know the synthesis and analysis equations
    • Be able to set up integrals or summations to determine \(x(t)\) or \(X[k]\) for periodic signals
    • Know how to find the actual Fourier Series coefficients for periodic signals made up of cos and sin
    • Be able to use the Fourier Series and Fourier Series Property tables
  3. Fourier Transform
    • Know the synthesis and analysis equations
    • Be able to set up integrals or summations to determine \(x(t)\) or \(X(j\omega)\) for signals that have Fourier Transforms
    • Be able to use the Fourier Transform and Fourier Transform Property tables
    • Be able to use partial fraction expansion as an interim step of inverse Fourier Transforms
      • I will only give you FT having denominators of the form \(\Pi\left(j\omega+a_i\right)\) where all the \(a_i\) are real and unique.
  4. Sampling and Reconstruction
    • Know, understand, and be able to reproduce the process of sampling with an impulse train of unit amplitude at a given sampling rate with sampling period \(T_S\).
    • Understand the necessity for a band-limited input signal and the relationship between the band-limit and the sampling rate required to make sure aliasing does not happen.
  5. Amplitude Modulation and Demodulation
    • Know, understand, and be able to reproduce the basic block diagrams for Full AM (Fig. 5.3) and DSB-SC Modulation (Fig. 5.12 (a)).
    • Know, understand, and be able to reproduce the circuit for envelope detection. You will not be required to determine values for the circuit elements.
    • Know, understand, and be able to reproduce the basic block diagram for a demodulator using coherent detection (Fig. 5.12 (b)).
    • For Full AM and DSB-SC, and given system parameters and particular input signals, be able to sketch the frequency domain of transmitted and reconstructed signals.

Equation Sheet

The following equation sheet will be provided with the test. If you believe there are other equations that should be added, list them on the discussion page before 5PM on Saturday, April 10th.

Specifically Not On The Test

  1. Maple
  2. MATLAB
  3. Laplace Transforms
Retrieved from "https://pundit.pratt.duke.edu/piki/index.php?title=ECE_280/Spring_2010/Test_2&oldid=3379"