ECE 110/Fall 2022/Lab Supplements
Lab 0
Typographical/Other Errors
None yet!
Clarifications
None yet!
Relevant Resources
- Tinkercad web site: https://www.tinkercad.com/
- Arduino web website: https://www.arduino.cc/
- Software page: https://www.arduino.cc/en/Main.Software
- Support page: https://support.arduino.cc/hc/en-us
- Gradescope web site: https://www.gradescope.com/
Lab 1
Typographical/Other Errors
None yet!
Clarifications
None yet!
Relevant Resources
- Tinkercad web site: https://www.tinkercad.com/
- Arduino web website: https://www.arduino.cc/
- Support page: https://support.arduino.cc/hc/en-us
- If statement page: https://www.arduino.cc/reference/en/language/structure/control-structure/if/
- Gradescope web site: https://www.gradescope.com/
- EGRWiki pages:
- ECE_110/Equipment/Breadboards
- Resistor_Color_Codes
- ECE_110/Equipment/Keysight_36311A DC Power Supply
- ECE_110/Equipment/Keysight_34460A Digital Multimeter
- Examples/Req Equivalent resistance and voltage division examples
Lab 2
Typographical/Other Errors
None yet!
Clarifications
None yet!
Relevant Resources
- Tinkercad web site: https://www.tinkercad.com/
- Arduino web website: https://www.arduino.cc/
- Support page: https://support.arduino.cc/hc/en-us
- If statement page: https://www.arduino.cc/reference/en/language/structure/control-structure/if/
- Gradescope web site: https://www.gradescope.com/
- ASCII table: http://www.asciitable.com/
- EGRWiki pages:
- ECE 110/Equipment/XBee XBee wireless communication module
- Examples/Req Equivalent resistance and voltage division examples
- ECE 110/Equipment/Built in RGB LED
- Parallax Pages
Lab 3
Typographical/Other Errors
None yet!
Clarifications
Resistor Table Codes
The following $$\LaTeX$$ code was used in the lab handout to make the four example tables for resistors. Note that the command:
\usepackage[dvipsnames]{xcolor}
needs to be in the preamble to define specialty colors like Goldenrod. Also, the \strut command is used to produce an unprinted character that is slightly larger than any letter in the font. Without it, the colorboxes go slightly above the tallest ascender in the word and slightly below the deepest descender in a word.
\begin{center}
\begin{tabular}{|c|cccc|} \hline
Resistor & 1st & 2nd & 3rd & 4th\\ \hline
43 $\Omega$ & yellow & orange & black & gold\\ \hline
\end{tabular}
\end{center}
or
\begin{center}
\begin{tabular}{|c|cccc|} \hline
Resistor & 1st & 2nd & 3rd & 4th\\ \hline
43 $\Omega$ & \colorbox{yellow}{~\strut ~} & \colorbox{orange}{~\strut ~} & \colorbox{black}{~\strut ~} & \colorbox{Goldenrod}{~\strut ~}\\ \hline
\end{tabular}
\end{center}
or
\begin{center}
\begin{tabular}{|c|cccc|} \hline
Resistor & 1st & 2nd & 3rd & 4th\\ \hline
43 $\Omega$ & \color{yellow}yellow\color{black} & \color{orange}orange\color{black} & black & \color{Goldenrod}gold\color{black}\\ \hline
\end{tabular}
\end{center}
or
\begin{center}
\begin{tabular}{|c|cccc|} \hline
Resistor & 1st & 2nd & 3rd & 4th\\ \hline
43 $\Omega$ & \colorbox{yellow}{\strut yellow} & \colorbox{orange}{\strut orange} & \colorbox{black}{\color{white}\strut black\color{black}} & \colorbox{Goldenrod}{\strut gold}\\ \hline
\end{tabular}
\end{center}
You can also create new functions in $$\LaTeX$$ if you find yourself doing similar things over and over. For example, the following three commands might be useful in creating the last version of the table:
\newcommand{\rescolw}[1]{\colorbox{#1}{\makebox(40,12){\textcolor{white}{#1}}}}
\newcommand{\rescolk}[1]{\colorbox{#1}{\makebox(40,12){\textcolor{black}{#1}}}}
\newcommand{\rescolg}{\colorbox{Goldenrod}{\makebox(40,12){\textcolor{black}{gold}}}}
where the [1] means there will be one argument; that argument gets placed wherever the #1 is in the new command. The last version of the table can now be written as:
\begin{center}
\begin{tabular}{|c|cccc|} \hline
Resistor & 1st & 2nd & 3rd & 4th\\ \hline
43 $\Omega$ & \rescolk{yellow} & \rescolk{orange} & \rescolw{black} & \rescolg\\ \hline
\end{tabular}
\end{center}
Note that gold was given its own command because there is no "gold" color in color. In the other two new commands, the argument was used both to define the color and to type the name of the color; in the \rescolg, there is no argument and the black text color, word gold, and Goldenrod background were all hard coded.
Relevant Resources
- Gradescope web site: https://www.gradescope.com/
- EGRWiki pages:
- Root_Mean_Square
- Resistor_Color_Codes
- ECE_110/Equipment/Keysight_EDU33211A Waveform/Function Generator
- ECE_110/Equipment/Keysight_DSOX1202A Digital Oscilloscope
- ECE 110/Equipment/Keysight 34460A Multimeter
- Examples/Req Equivalent resistance and voltage division examples
Lab 4
Typographical/Other Errors
None yet!
Clarifications
Relevant Resources
- Sensors
- Hall Effect Sensor
- Color Sensor
- Thermal
- RFID Reader
- PING
- Displays
- Piezoelectric Speaker
- LED
- CX-Bot RGB LED
- 16x2 LCD
