Resistors

Resistors are passive electronic components.

Examples of resistors.

Identification

Resistors' values are shown on the resistor, coded in a series of colored bands.

The resistors in labs here in Pratt are almost all 5% resistors or 1% resistors. That is, their actual values are either are guaranteed to be within 5% or 1% of the nominal, or labeled value.

The 5% resistors have three bands showing their value: two significant figures, and then the number of zeros.

The 1% resistors have four bands showing their value: three significant figures, and then the number of zeros.

For most of the resistors found around here, the last band will indicate the tolerance. For 5% resistors, the tolerance band will be the fourth band and will be the color gold. For 1% resistors the tolerance band will be the 5th band and will be brown.

In which order do you read the bands--left to right or right to left? Good question! You must use your intuition here. On 5% resistors, this is easy: the first significant figure will never be gold. If you read a 1% resistor and come up with an unlikely number, then you're probably reading it backward. Also, the first band is closer to the edge than the last band; on resistors with bulges at the ends, the first band is the one on the bulge.

"three band" (usually 5%) resistor color code:

Color	1st band	2nd band	3rd band (multiplier)	4th band (tolerance)
Black	0	0	×100
Brown	1	1	×101	±1% (F)
Red	2	2	×102	±2% (G)
Orange	3	3	×103
Yellow	4	4	×104
Green	5	5	×105	±0.5% (D)
Blue	6	6	×106	±0.25% (C)
Violet	7	7	×107	±0.1% (B)
Gray	8	8	×108	±0.05% (A)
White	9	9	×109
Gold			×10-1	±5% (J)
Silver			×10-2	±10% (K)
None				±20% (M)

"four band" (usually 1%) resistor color code:

Color	1st band	2nd band	3rd band	4th band (multiplier)	5th band (tolerance)
Black	0	0	0	×100
Brown	1	1	1	×101	±1% (F)
Red	2	2	2	×102	±2% (G)
Orange	3	3	3	×103
Yellow	4	4	4	×104
Green	5	5	5	×105	±0.5% (D)
Blue	6	6	6	×106	±0.25% (C)
Violet	7	7	7	×107	±0.1% (B)
Gray	8	8	8	×108	±0.05% (A)
White	9	9	9	×109
Gold				×10-1	±5% (J)
Silver				×10-2	±10% (K)
None					±20% (M)

5% Resistor Standard Values

10	11	12	13	15	16	18	20	22	24	27	30
33	36	39	43	47	51	56	62	68	75	82	91

1% Resistor Standard Values

100	102	105	107	110	113	115	118
121	124	127	130	133	137	140	143
147	150	154	158	162	165	169	174
178	182	187	191	196	200	205	210
215	221	226	232	237	243	249	255
261	267	274	280	287	294	301	309
316	324	332	340	348	357	365	374
383	392	402	412	422	432	442	453
464	475	487	499	511	523	536	549
562	576	590	604	619	634	649	665
681	698	715	732	750	768	787	806
825	845	866	887	909	931	953	976

Questions

Post your questions by editing the discussion page of this article. Edit the page, then scroll to the bottom and add a question by putting in the characters *{{Q}}, followed by your question and finally your signature (with four tildes, i.e. ~~~~). Using the {{Q}} will automatically put the page in the category of pages with questions - other editors hoping to help out can then go to that category page to see where the questions are. See the page for Template:Q for details and examples.