Difference between revisions of "EGR 103 Startup"

From PrattWiki
Jump to navigation Jump to search
 
(40 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
This page will be a guide to how to get working on things for [[EGR 103]].  It has been updated for Fall 2016.
+
This page is a guide to how to get working on things for [[EGR 103]].  It has been updated for Fall 2023.
  
 +
== Resources ==
 +
The main resources for [[EGR 103]] are listed on the bottom of that page.  There is also Pratt Pundit's [[:Category:EGR 103]], which collects pages of special interest to EGR 103 students.
 +
 +
== Tools ==
 +
The following will be a comprehensive list of the tools we will be using for the class, how to access or install them, and how to configure them.
 +
 +
=== Working From Off Campus ===
 +
'''Note''': If you are not on Duke internet, you will need to connect using a security program known as a VPN.  See [[How_To_Get_Work_Done#Connecting_from_Off_Campus|Connecting from Off Campus]] for links to get the program. This is particularly important for syncing to and having your Duke Box mounted on your computer.
 +
 +
=== File Storage - Box ===
 +
You will be working with files on your own computer but you will be backing them up with a system called Box.  Duke students have 50 GB of free storage for academic purposes on the box system.  Furthermore, you can have Box sync up with your local files (as long as you put them in the right place)!  If you need to work offline, you can, and when you are back on the Duke network, Box will automatically back up your files.  You will also be able to share files with TAs if necessary.
 +
 +
==== First-time Box Setup ====
 +
* Go to [https://box.duke.edu/ https://box.duke.edu/].
 +
* Click the LOG IN button.
 +
* If asked if you are Part of Duke? Click Continue.
 +
* Log In using your Duke credentials.
 +
* You should now see your Duke Box - it may be entirely empty.
 +
 +
==== First-time Local Folder Setup ====
 +
Next you will create a folder on your local computer to synchronize with your Box folder.
 +
* Go to [https://duke.app.box.com/app-center/box_drive/app https://duke.app.box.com/app-center/box_drive/app] for information about Box Drive and for the download links for Windows and Mac.  The links are near the bottom of the page.
 +
* Download the appropriate file and install it.  For macOS, if it asks you to allow the extensions, you need to open System Preferences; click the General field and then there should be an "Allow" button at the bottom right.  You may need to unlock system preferences by clicking the lock icon at the lower left and entering your password first.
 +
* Keep track of where the Box folder is placed on your drive. 
 +
** For Windows it is likely a spur off the main File Explorer window and located specifically at <code>C:\Users\USER\Box</code> where '''USER''' is your Windows user name.
 +
** For Mac, a Box drive will be mounted.
 +
* To see it work, go into your Box folder on your computer, create a new folder within it, and call it '''EGR103F23''' in all caps with no spaces.  After you have created it, refresh the browser that is looking at your Box account and the folder should show up in your list!
 +
* Box Drive generally works when you are online and thus keeps things in the cloud and only pulls them down when you need them.  To make sure that you have access when you are offline, and to mitigate any internet connectivity issues, you will want to tell Drive to make your folders available offline:
 +
** For MAC people: You are all set - do not worry about making it available offline.
 +
** For Windows people: In the File Explorer or Finder, open your Box folder. 
 +
** If the '''EGR103F23''' folder has a white check in a green circle as part of the icon, you are all set.  If not:
 +
*** Right-click '''EGR103F23''' and in the context box find "Make Available Offline" - it may be in the "Show more options" section of the context box.
 +
*** Once things have synchronized, there should be a white check in a green circle by the folder - that is the sign that the folder will be available offline.
 +
* You will never need to set this up again for the computer you are currently working on, but if you end up working on a different computer you will need to install Drive.  This also means you can work from public or other computers as your files will always be on Box.
  
−
== Resources ==
+
=== Document Preparation - Overleaf ===
−
The main resources for [[EGR 103]] are listed on the bottom of that page.  There is also Pratt Pundit's [[:Category:EGR 103]], which collects page of special interest to EGR 103 students.
+
This semester, we will be using a freemium tool called Overleaf for making lab documents.  We will only need the free features for work this semester.  Overleaf is a [[LaTeX]] editing and processing program. One drawback is that it cannot access files directly on your drive but rather needs you to upload them.  As you go through the course, you will get a better and better idea of which files need to be uploaded. 
 +
'''''Note:''''' During most labs, you will not need to get your Overleaf project set up until you are ready to start putting your lab report together.  For Lab 1, however, working on Overleaf is the whole point of the lab!
 +
 
 +
==== Starting Up ====
 +
* You can log in using your Duke credentials at [https://www.overleaf.com/edu/duke https://www.overleaf.com/edu/duke]
 +
* Once you have logged in, you will have the option to look at some [https://www.overleaf.com/templates templates] or the [https://www.overleaf.com/learn Help Guide].  We will look at those in lab on my computer, so go ahead and progress straight to creating your first LaTeX project.  Make it a blank project, and call it <code>EGR103F23</code>.  Overleaf will create a main document with some boilerplate information in it.  All of your labs will eventually be in this one project folder.
 +
 
 +
<!--
 +
=== Connecting Box and Overleaf - GIT ===
 +
This semester, we will be using a version control program called '''git''' (pronounced with a hard g, as in "get") to bridge the gap between the Box drive and the Overleaf projects. 
 +
 
 +
==== Starting Up ====
 +
You will need to install git if you do not already have it -- there are instructions at [https://git-scm.com/book/en/v2/Getting-Started-Installing-Git https://git-scm.com/book/en/v2/Getting-Started-Installing-Git].  For Windows, use [https://git-scm.com/download/win https://git-scm.com/download/win].  For macOS, you probably already have it installed - as recommended, just open a Terminal and type <code>git --version</code>.
  
−
== Working from Home / Other Computers ==
+
You may also want to familiarize yourself with the basics of git with the [https://git-scm.com/book/en/v2 Pro Git Book].  I recommend reading through the "Getting Started" chapter and also I will mention that there will likely be many, many terms that do not make sense.  Don't worry about that!  Also, I would recommend '''not''' trying to configure things or even using git until we have talked about it more in lab 1.
−
{{:Working from home}}
+
-->
  
−
== One-time-only activities ==
+
=== Getting Starter Files ===
−
There are a couple things you will do during the in-lab time part of lab 1 that you (should) only have to do once.  They are:
 
−
* Setting up your UNIX account - this will be done in lab.
 
−
* Setting up permissions for your directories - this process is described at [[User:DukeEgr93/WindowsPermission]] and will also be completed during lab.
 
 
<!--
 
<!--
−
* Setting up the default paper sizes for [[LaTeX]].  This must be done since he default case for the dvips and dvipdf commands is to use A4 paper. To correct this, log into a Teer machine (login-teer.oit.duke.edu) and type
+
9/7/2022 experiment - using Box copy!
−
  texconfig
+
* ONE TIME ONLY - There is a style file that you will need for your LaTeX documents.  You will only need to copy it this week and it will eventually live in the <code>EGR103F23</code> folder (the top level of your Overleaf project for this class). 
−
: Press return to continue, then in the window that comes up, arrow down to the second row, PAPER. Hit return, then arrow down to LETTER and hit return. You may need to press return to continue after some configuration files have been changed. When you get back to the colorful window, hit return to EXIT.
+
** Go to [https://duke.app.box.com/v/EGR103F23public https://duke.app.box.com/v/EGR103F23public] which is my shared EGR 103 Box folder for this semester.  Log in to Box if asked.
 +
** Open the General folder
 +
** Hover over the EGR103style.sty file and an icon with three dots should appear at right. Click it.
 +
** From the triple dot menu, pick Move or Copy.
 +
** In the window that comes up next, put EGR103F23 in the search box.  Your EGR103F23 folder should show up in the selections below.  Select it then click Copy.
 +
* EACH WEEK - I will give you access to at least the lab skeleton. This week, there are actually several files you will need.  Here's how to get them:
 +
** Go to [https://duke.app.box.com/v/EGR103F23public https://duke.app.box.com/v/EGR103F23public] which is my shared EGR 103 Box folder for this semester.  Log in to Box if asked.
 +
** Hover over the Lab01Files folder and an icon with three dots should appear at right. Click it.
 +
** From the triple dot menu, pick Move or Copy.
 +
** In the window that comes up next, put EGR103F23 in the search box.  Your EGR103F23 folder should show up in the selections below.  Select it then click Copy.
 +
==== Uploading to Overleaf ====
 +
Generally you will not need to upload to Overleaf until you are ready to start working on the lab report.  For Lab 1, the lab report is the only thing you will be working on so you can upload now.
 +
* ONE TIME ONLY - The EGR103style.sty files needs to be in your top level directory in your Overleaf project. You will only need to put it there once.
 +
** Open/go to a browser tab that is looking at [https://www.overleaf.com/ https://www.overleaf.com/].  Click on the <code>EGR103F23</code> project if you are not already there.  You likely only have one file - <code>main.tex</code>.  Click <code>main.tex</code> to make it active.
 +
** Near the top right of the screen, just above the list of files that contains <code>main.tex</code>, there are three icons for New File, New Folder, and Upload, where the latter looks like a computer with an arrow rising from it.  Click the Upload icon.
 +
** In the Add Files window that comes up next, either drag the <code>EGR103style.sty</code> file you downloaded from Box into the "Drag here" window of click "select from your computer" and go find it.
 +
** Your project should now have both <code>main.tex</code> and <code>EGR103style.sty</code> in the file list.
 +
** You will only need to upload this style file once; each of your lab documents will be stored in a subfolder of your main project, and Overleaf is smart enough to look at the top-level folder for extra files!
 +
* EVERY WEEK - You will make a new folder in your Overleaf project and upload files '''''to that new folder, not to the top level'''
 +
** In Overleaf, in your top-level <code>EGR103F23</code> project, click <code>main.tex</code> to make it active, then click the New Folder icon (second from the left just above the file list). Name the folder <code>LAB01</code>.
 +
**  Click on the <code>LAB01</code> folder to make it active, click on the vertical dots to the right to get the menu, then click Upload.
 +
** Drag all the files from your <code>Box/EGR103F23/Lab01Files</code> folder into the available space for uploading files and upload the files.  This will copy them into Overleaf. To see them, click the > to the left of <code>LAB01</code> to turn it into a v and show you the files.
 +
** Click on the <code>Lab01Sample_F23.tex</code> file to make it active.
 +
** Above the preview panel (third panel), click the <code>Recompile</code> button to process the document. The lab skeleton will compile and you should see a preview of it.
 
-->
 
-->
  
−
== Other activities ==
+
* '''Pre-script''' - for some people, after uploading all the files to Overleaf, some (or all) of the files fail to appear.  If you upload the files and they do not seem to show up, click the arrow just to the right of the "Menu" icon at the top left of the screen to go back to your projects list and then click the name of your project to go back to the project.  (strange, I know, but it seems to do the trick!)
−
To work on the lab from your own computer, follow these steps:
+
* ONE TIME ONLY - There is a style file that you will need for your LaTeX documents.  You will only need to copy it this week and it will live in the <code>EGR103F23</code> folder (the top level of your Overleaf project for this class). 
−
* If on Windows, start [[MobaXterm]]
+
** Go to [https://duke.box.com/v/EGR103F23stylefile https://duke.box.com/v/EGR103F23stylefile] and, if need be, log in to Box
−
* If on Mac, start the Terminal program in the [[XQuartz]] package.  Use it to connect to the login-teer machines.
+
** Box will tell you that it can't preview the file but it should give you an option to Download it.  Download the file and note where it is saved.
−
* Test the graphics connection by typing <code>xterm &</code>
+
** Open/go to a browser tab that is looking at [https://www.overleaf.com/ https://www.overleaf.com/].  Click on the <code>EGR103F23</code> project if you are not already there.  You likely only have one file - <code>main.tex</code>.
−
** If the xterm window comes up - great!  If not, note the following:
+
** Near the top right of the screen, just above the list of files that contains <code>main.tex</code>, there are three icons for New File, New Folder, and Upload, where the latter looks like a computer with an arrow rising from it.  Click the Upload icon.
−
*** For Macs, you need to type <code>xhost +</code> in a terminal window once -- this generally stays in place for the rest of the time you own that computer...
+
** In the Add Files window that comes up next, either drag the <code>EGR103style.sty</code> file you downloaded from Box into the "Drag here" window of click "select from your computer" and go find it.
−
* Once connected to a terminal and testing the graphics, change into your lab 1 directory with:
+
** Your project should now have both <code>main.tex</code> and <code>EGR103style.sty</code> in the file list.
−
<source lang="text">
+
** You will only need to upload this style file once; each of your lab documents will be stored in a subfolder of your main project, and Overleaf is smart enough to look at the top-level folder for extra files!
−
cd EGR103
+
* EACH WEEK - I will give you access to at least the lab skeleton.  This week, there are actually several files you will need.  Here's how to get them:
−
cd lab1
+
** Go to [https://duke.app.box.com/v/EGR103F23public https://duke.app.box.com/v/EGR103F23public] which is my shared EGR 103 Box folder for this semester.
−
</source>
+
** Hover over the Lab01Files folder and then click the ... menu at the far right of <code>Lab01Files</code> that appears when you hover.  Select Download.  Box will download the files.  Depending on whether you are logged into Box, it might give you the opportunity to log in. You do not need to.
−
Note: the EGR103 directory will be created during Lab 1.  
+
** Windows machines will download a zip file to open while macOS will open a folder to open.
−
* Edit your lab report with [[emacs]] using
+
*** If on Windows, double-click the zip file; from there you should be able to click on the <code>Lab01Files</code> folder and then click <code>Extract all</code>.  In the "Extract Compressed (Zipped) Folders" dialog window that comes up, click the "Browse" button to the right of the box with the location it is planning to deposit the folder and then navigate to your <code>Box/EGR103F23</code> folder.  That is where you will want to put the Lab01Files folder.
−
<source lang="text">
+
*** If on macOS, just move the folder that you downloaded into your <code>Box/EGR103F23</code> folder. 
−
emacs lab1.tex &
+
*: After the folder is copied and synchronized, the folder should get a green check.
−
</source>
+
** Now open the <code>Box/EGR103F23/Lab01Files</code> folder and make a copy of the <code>Lab01Sample_F23.tex</code> file; call the new file <code>lab1.tex</code>.
−
:Don't forget the &!
+
** In Overleaf, in your top-level <code>EGR103F23</code> project, click the New Folder icon (second from the left just above the file list). Name the folder <code>LAB01</code>.
−
* After saving the file with [[emacs]], process the [[LaTeX]] file with
+
** Click on the <code>LAB01</code> folder to make it active, click on the vertical dots to the right to get the menu, then click Upload.  '''''Make sure you are uploading to the LAB01 folder and not to the top-level folder on Overleaf.'''''
−
<source lang="text">
+
** Drag all the files from your <code>Box/EGR103F23/Lab01Files</code> folder into the available space for uploading files and upload the files.  This will copy them into Overleaf.  To see them, click the > to the left of <code>LAB01</code> to turn it into a v and show you the files.
−
latex lab1.tex  
+
** Click on the <code>lab1.tex</code> file to make it active.
−
</source>
+
** On the right above the preview panel, click the <code>Recompile</code> button to process the <code>lab1.tex</code> document. The lab skeleton will compile and you should see a preview of it.
−
:Make sure LaTeX compiles!  If not, check what kind of error there is:
+
 
−
** If LaTeX can't see lab1.tex or sits there with two asterisks, hit CTRL-D and figure out where the file is.
+
=== Turning Things In ===
−
** If it is some other error, hit CTRL-D and identify the error.  Fix the problem in [[emacs]] and run again.
+
See [[EGR 103/Uploading Solutions]].  During the first lab, you will download the incomplete PDF that is made from the starter files and upload it to a Gradescope assignment called "Gradescope Test."  When you are done with the work for Lab 1, you will download the complete PDF and upload it to a Gradescope assignment called "Lab 1".
−
*Once LaTeX succeeds, run [[dvipdf]] with:
+
 
−
<source lang="text">
+
== Tools for Later ==
−
dvipdf lab1.dvi
+
=== Accessing (some) Assignments and (some) Readings - Connect ===
−
</source>
+
The book for this semester is an electronic book hosted on McGraw-Hill's Connect system.  You should have received an e-mail from the Sakai page about where to find it.
−
to create a PostScript file.
+
 
−
* Finally, use [[evince]] to view the pdf file:
+
=== Turning (some) Things in - Gradescope ===
−
<source lang="text">
+
Some of the assignments for this semester will be graded using a system called Gradescope. Gradescope has many powerful features, including the ability to automatically grade some programming assignments!  
−
evince lab1.pdf &
+
 
−
</source>
+
==== Starting up ====
−
:Don't forget the &!  There may be a bunch of little warnings and errors that pop up.   
+
To access Gradescope, go to [https://www.gradescope.com/ https://www.gradescope.com/].  On the opening page, choose "School Credentials" and then "Duke NetID".  If you are enrolled in the course (and if Sakai has had a chance to update the roster) EGR 103 should be one of the classes you see.
−
*To print, use the print command in evince and select the "lp0" printer.  If your documents are not showing up in your ePrint queue when you swipe your card, see the [[ePrint]] page for troubleshooting info.   
+
 
 +
=== Writing and Running Code - Anaconda ===
 +
Finally (!) we will be using the Anaconda distribution of Python for this semester.  The Anaconda package comes with several development environments and other features that are useful to us. 
 +
 
 +
==== Starting up ====
 +
See [[Installing Anaconda and Spyder]] for information.
 +
 
 +
=== Web Pages Of Interest ===
 +
* Most course information is at [http://classes.pratt.duke.edu/EGR103F23/ http://classes.pratt.duke.edu/EGR103F23/].
 +
* The discussion board is at [https://edstem.org/ https://edstem.org/].
 +
<!-- * Grades will mainly be published at [https://sakai.duke.edu https://sakai.duke.edu] and you will also occasionally turn work in there. -->
 +
* You will also turn work in on [https://www.gradescope.com/ https://www.gradescope.com/] as noted above.
 +
* Learn more about Zoom at [https://oit.duke.edu/what-we-do/applications/zoom-meetings https://oit.duke.edu/what-we-do/applications/zoom-meetings]
 +
* Want free stuff? Take a tour of the things you can download for free by virtue of being a Duke student at [https://oit.duke.edu/category/software https://oit.duke.edu/category/software]
  
−
As you are editing your document, you should add a little to the .tex file in the emacs window, save the .tex file, and process it with LaTeX.  If that works, then run the dvipdf command -- if evince is open and viewing the PDF file, it will detect a change in the PDF file and automatically load the latest version.
+
== Getting Work Done ==
 +
See the page [[How To Get Work Done]]
  
 
== Troubleshooting ==
 
== Troubleshooting ==
  
−
=== Blank Document ===
+
=== Python Errors ===
−
If
+
If you encounter problems in Python, or you are new to programming, you may find it useful to check [[Python:Common Mistakes]] for help.
−
emacs lab1.tex &
 
−
command brings up a blank document!  You probably forgot to get into your lab1 directory.  Be sure to type both parts of
 
−
cd EGR103
 
−
cd lab1
 
−
=== Windows Don't Show Up ===
 
−
The
 
−
emacs lab1.tex &
 
−
command doesn't seem to do anything.  You probably do not have graphics set correctly.  To check, type
 
−
xterm
 
−
without an ampersand.  If you get an error message about the display not being set or localhost not working or something like that, you need to re-do your session to accept graphics.  For both [[MobaXterm]] and [[XQuartz]], make sure you have the -XY part of the line of code you are typing in to connect to a Teer machine.
 
−
<!--make sure [[Xwin]] is running and make sure in [[PuTTY]] that you correctly hit the X11 Forwarding Enabled box in your session. -->
 
−
=== The File is Locked ===
 
−
If you try to open a file in emacs and at the bottom of the window you get a message:
 
−
  ".../EGR103/lab1/lab1.tex locked by NetID@login-t... (pid nnnn): (s, q, p, ?)?"
 
−
This usually happens if your connection closed unexpectedly while editing the document.  Navigate to the folder and type:
 
−
ls
 
−
If there is a file similar to the one you are editing but surrounded by hashtags, that is what is causing the problem.  The easiest solution is, in that little emacs window with the message above, type "s"
 
  
 
== Questions ==
 
== Questions ==

Latest revision as of 03:31, 28 August 2023

This page is a guide to how to get working on things for EGR 103. It has been updated for Fall 2023.

Resources

The main resources for EGR 103 are listed on the bottom of that page. There is also Pratt Pundit's Category:EGR 103, which collects pages of special interest to EGR 103 students.

Tools

The following will be a comprehensive list of the tools we will be using for the class, how to access or install them, and how to configure them.

Working From Off Campus

Note: If you are not on Duke internet, you will need to connect using a security program known as a VPN. See Connecting from Off Campus for links to get the program. This is particularly important for syncing to and having your Duke Box mounted on your computer.

File Storage - Box

You will be working with files on your own computer but you will be backing them up with a system called Box. Duke students have 50 GB of free storage for academic purposes on the box system. Furthermore, you can have Box sync up with your local files (as long as you put them in the right place)! If you need to work offline, you can, and when you are back on the Duke network, Box will automatically back up your files. You will also be able to share files with TAs if necessary.

First-time Box Setup

  • Go to https://box.duke.edu/.
  • Click the LOG IN button.
  • If asked if you are Part of Duke? Click Continue.
  • Log In using your Duke credentials.
  • You should now see your Duke Box - it may be entirely empty.

First-time Local Folder Setup

Next you will create a folder on your local computer to synchronize with your Box folder.

  • Go to https://duke.app.box.com/app-center/box_drive/app for information about Box Drive and for the download links for Windows and Mac. The links are near the bottom of the page.
  • Download the appropriate file and install it. For macOS, if it asks you to allow the extensions, you need to open System Preferences; click the General field and then there should be an "Allow" button at the bottom right. You may need to unlock system preferences by clicking the lock icon at the lower left and entering your password first.
  • Keep track of where the Box folder is placed on your drive.
    • For Windows it is likely a spur off the main File Explorer window and located specifically at C:\Users\USER\Box where USER is your Windows user name.
    • For Mac, a Box drive will be mounted.
  • To see it work, go into your Box folder on your computer, create a new folder within it, and call it EGR103F23 in all caps with no spaces. After you have created it, refresh the browser that is looking at your Box account and the folder should show up in your list!
  • Box Drive generally works when you are online and thus keeps things in the cloud and only pulls them down when you need them. To make sure that you have access when you are offline, and to mitigate any internet connectivity issues, you will want to tell Drive to make your folders available offline:
    • For MAC people: You are all set - do not worry about making it available offline.
    • For Windows people: In the File Explorer or Finder, open your Box folder.
    • If the EGR103F23 folder has a white check in a green circle as part of the icon, you are all set. If not:
      • Right-click EGR103F23 and in the context box find "Make Available Offline" - it may be in the "Show more options" section of the context box.
      • Once things have synchronized, there should be a white check in a green circle by the folder - that is the sign that the folder will be available offline.
  • You will never need to set this up again for the computer you are currently working on, but if you end up working on a different computer you will need to install Drive. This also means you can work from public or other computers as your files will always be on Box.

Document Preparation - Overleaf

This semester, we will be using a freemium tool called Overleaf for making lab documents. We will only need the free features for work this semester. Overleaf is a LaTeX editing and processing program. One drawback is that it cannot access files directly on your drive but rather needs you to upload them. As you go through the course, you will get a better and better idea of which files need to be uploaded. Note: During most labs, you will not need to get your Overleaf project set up until you are ready to start putting your lab report together. For Lab 1, however, working on Overleaf is the whole point of the lab!

Starting Up

  • You can log in using your Duke credentials at https://www.overleaf.com/edu/duke
  • Once you have logged in, you will have the option to look at some templates or the Help Guide. We will look at those in lab on my computer, so go ahead and progress straight to creating your first LaTeX project. Make it a blank project, and call it EGR103F23. Overleaf will create a main document with some boilerplate information in it. All of your labs will eventually be in this one project folder.


Getting Starter Files

  • Pre-script - for some people, after uploading all the files to Overleaf, some (or all) of the files fail to appear. If you upload the files and they do not seem to show up, click the arrow just to the right of the "Menu" icon at the top left of the screen to go back to your projects list and then click the name of your project to go back to the project. (strange, I know, but it seems to do the trick!)
  • ONE TIME ONLY - There is a style file that you will need for your LaTeX documents. You will only need to copy it this week and it will live in the EGR103F23 folder (the top level of your Overleaf project for this class).
    • Go to https://duke.box.com/v/EGR103F23stylefile and, if need be, log in to Box
    • Box will tell you that it can't preview the file but it should give you an option to Download it. Download the file and note where it is saved.
    • Open/go to a browser tab that is looking at https://www.overleaf.com/. Click on the EGR103F23 project if you are not already there. You likely only have one file - main.tex.
    • Near the top right of the screen, just above the list of files that contains main.tex, there are three icons for New File, New Folder, and Upload, where the latter looks like a computer with an arrow rising from it. Click the Upload icon.
    • In the Add Files window that comes up next, either drag the EGR103style.sty file you downloaded from Box into the "Drag here" window of click "select from your computer" and go find it.
    • Your project should now have both main.tex and EGR103style.sty in the file list.
    • You will only need to upload this style file once; each of your lab documents will be stored in a subfolder of your main project, and Overleaf is smart enough to look at the top-level folder for extra files!
  • EACH WEEK - I will give you access to at least the lab skeleton. This week, there are actually several files you will need. Here's how to get them:
    • Go to https://duke.app.box.com/v/EGR103F23public which is my shared EGR 103 Box folder for this semester.
    • Hover over the Lab01Files folder and then click the ... menu at the far right of Lab01Files that appears when you hover. Select Download. Box will download the files. Depending on whether you are logged into Box, it might give you the opportunity to log in. You do not need to.
    • Windows machines will download a zip file to open while macOS will open a folder to open.
      • If on Windows, double-click the zip file; from there you should be able to click on the Lab01Files folder and then click Extract all. In the "Extract Compressed (Zipped) Folders" dialog window that comes up, click the "Browse" button to the right of the box with the location it is planning to deposit the folder and then navigate to your Box/EGR103F23 folder. That is where you will want to put the Lab01Files folder.
      • If on macOS, just move the folder that you downloaded into your Box/EGR103F23 folder.
    After the folder is copied and synchronized, the folder should get a green check.
    • Now open the Box/EGR103F23/Lab01Files folder and make a copy of the Lab01Sample_F23.tex file; call the new file lab1.tex.
    • In Overleaf, in your top-level EGR103F23 project, click the New Folder icon (second from the left just above the file list). Name the folder LAB01.
    • Click on the LAB01 folder to make it active, click on the vertical dots to the right to get the menu, then click Upload. Make sure you are uploading to the LAB01 folder and not to the top-level folder on Overleaf.
    • Drag all the files from your Box/EGR103F23/Lab01Files folder into the available space for uploading files and upload the files. This will copy them into Overleaf. To see them, click the > to the left of LAB01 to turn it into a v and show you the files.
    • Click on the lab1.tex file to make it active.
    • On the right above the preview panel, click the Recompile button to process the lab1.tex document. The lab skeleton will compile and you should see a preview of it.

Turning Things In

See EGR 103/Uploading Solutions. During the first lab, you will download the incomplete PDF that is made from the starter files and upload it to a Gradescope assignment called "Gradescope Test." When you are done with the work for Lab 1, you will download the complete PDF and upload it to a Gradescope assignment called "Lab 1".

Tools for Later

Accessing (some) Assignments and (some) Readings - Connect

The book for this semester is an electronic book hosted on McGraw-Hill's Connect system. You should have received an e-mail from the Sakai page about where to find it.

Turning (some) Things in - Gradescope

Some of the assignments for this semester will be graded using a system called Gradescope. Gradescope has many powerful features, including the ability to automatically grade some programming assignments!

Starting up

To access Gradescope, go to https://www.gradescope.com/. On the opening page, choose "School Credentials" and then "Duke NetID". If you are enrolled in the course (and if Sakai has had a chance to update the roster) EGR 103 should be one of the classes you see.

Writing and Running Code - Anaconda

Finally (!) we will be using the Anaconda distribution of Python for this semester. The Anaconda package comes with several development environments and other features that are useful to us.

Starting up

See Installing Anaconda and Spyder for information.

Web Pages Of Interest

Getting Work Done

See the page How To Get Work Done

Troubleshooting

Python Errors

If you encounter problems in Python, or you are new to programming, you may find it useful to check Python:Common Mistakes for help.

Questions

Post your questions by editing the discussion page of this article. Edit the page, then scroll to the bottom and add a question by putting in the characters *{{Q}}, followed by your question and finally your signature (with four tildes, i.e. ~~~~). Using the {{Q}} will automatically put the page in the category of pages with questions - other editors hoping to help out can then go to that category page to see where the questions are. See the page for Template:Q for details and examples.

External Links

References

Retrieved from "https://pundit.pratt.duke.edu/piki/index.php?title=EGR_103_Startup&oldid=29878"